motorku: PDF-INSTALLATION INSTRUCTIONS 30mm FRONT ANTI-ROLL BAR 2000-up HONDA S2000 PART # 15.20.30

PARTS LIST: 1 – ANTI-ROLL BAR 1 – PKG. SILICONE GREASE 2 – BUSHINGS TOOLS REQUIRED: 1 – RATCHET 1 – 14mm WRENCH 1 – 3″ EXTENSION 1 – 5mm HEX WRENCH 1 – 10mm SOCKET 1 – TORQUE WRENCH 1 – 14mm SOCKET 1. Park car on a flat, level surface capable of supporting the vehicle’s weight on jack and jack stands. 2. Using the manufacturers recommended lifting point (s), raise front of vehicle and support with jack stands. NEVER WORK ON A VEHICLE SUPPORTED ONLY WITH A JACK! 4. Remove two (2) fasteners (10mm Hex) securing left and right corners of lower panel. 3. Remove plastic push fasteners (7) securing lower panel. 5. Disconnect end links from anti-roll bar by securing stud with 5mm hex key and loosening nut with 14mm wrench. (Left side shown, repeat for right side.)