Honda Installation Guide (CamGears)

1. Carefully removed stock timing belt according to instructions in factory manual. Rotate crankshaft to TDC position and remove stock timing gears andcamshaft keys. Completely remove stock timing gear dust guard behind the gears (do not reinstall).
2. Install new factory OEM keys on to the camshafts. Slide the timing gear disc in alignment with the camshaft keys, completely on to shafts, install and torque the pulley bolt aid washer to the end of the shaft, to factory specifications. See Assembly Clawing.
3. Race timing gear pulleys on to timing gear disc and align the key way center mark on the timing gear disc with the zero mark on the timing gear pulley. Fas- ten the gear pulley to the gear disc with the 12 -1/4 SHCS and washers (six on each timing gear). Torque the SHCS evenly. See Figure 1.0

Download file